ASUS P4V8X-X processor support and specifications

ASUS P4V8X-X motherboard specifications

Form factor:ATX
12" x 7.6" / 30.5 cm x 19.3 cm
CPU socket type:Socket 478
Front Side Bus:400 MHz
533 MHz
Chipset:VIA VT8237
Motherboard features:CrashFree BIOS 2
EZ Flash
MyLogo 2
Overclocking features:CPU Parameter Recall
JumperFree
Integrated Audio:6-channel audio
ADI AD1980 SoundMAX Audio codec
LAN:100/10 Mbps
BIOS:AMI BIOS
4 MB Flash
Expansion slots:PCI x 5
Internal connectors:ATX 12V Power (4-pin) x 1
ATX Power (20-pin) x 1
Front Panel Audio x 1
Rear panel ports:Audio I/O x 1
PS/2 Keyboard x 1
PS/2 Mouse x 1
Parallel port x 1
RJ45 x 1
Serial port x 1
USB 2.0/1.1 x 4
Included accessories:FDD cable(s) x 1
I/O Shield x 1
UltraDMA 133/100/66 cable(s) x 1
User manual x 1
NOTE: specifications are not complete

ASUS P4V8X-X CPU compatibility list

Part NumberFrequencyFeaturesBIOSPCBNotes
Intel Celeron
1.7 GHz400 FSB, L2 cache:128KBAnyAny 
1.8 GHz400 FSB, L2 cache:128KBAnyAny 
2.0 GHz400 FSB, L2 cache:128KBAnyAny 
2.1 GHz400 FSB, L2 cache:128KBAnyAny 
2.2 GHz400 FSB, L2 cache:128KBAnyAny 
2.3 GHz400 FSB, L2 cache:128KBAnyAny 
2.4 GHz400 FSB, L2 cache:128KBAnyAny 
2.5 GHz400 FSB, L2 cache:128KBAnyAny 
2.6 GHz400 FSB, L2 cache:128KBAnyAny 
2.7 GHz400 FSB, L2 cache:128KBAnyAny 
2.8 GHz400 FSB, L2 cache:128KBAnyAny 
Intel Celeron D
310 revE02.13 GHz, 533 FSB, Socket478 Any 
310 revG02.13 GHz, 533 FSB, Socket4781009.008Any 
3152.26 GHz, 533 FSB, Socket4781008Any 
3202.4 GHz, 533 FSB, Socket4781008Any 
3252.53 GHz, 533 FSB, Socket478, revC0/D01008Any 
3252.53 GHz, 533 FSB, Socket478, revE01008Any 
3302.66 GHz, 533 FSB, Socket4781008Any 
3352.8 GHz, 533 FSB, Socket4781008Any 
3402.93 GHz, 533 FSB, Socket4781008Any 
3453.06 GHz, 533 FSB, Socket4781008Any 
3503.2 GHz, 533 FSB, Socket478, revE01008Any 
3503.2 GHz, 533 FSB, Socket478, revG11009.008Any 
Intel Pentium 4
1.4 GHzSocket478, 400 FSB, L2 cache:256KBAnyAny 
1.5 GHzSocket478, 400 FSB, L2 cache:256KBAnyAny 
1.6 GHzSocket478, 400 FSB, L2 cache:256KBAnyAny 
1.6A GHzSocket478, 400 FSB, L2 cache:512KBAnyAny 
1.7 GHzSocket478, 400 FSB, L2 cache:256KBAnyAny 
1.8 GHzSocket478, 400 FSB, L2 cache:256KBAnyAny 
1.8A GHzSocket478, 400 FSB, L2 cache:512KBAnyAny 
1.9 GHzSocket478, 400 FSB, L2 cache:256KBAnyAny 
2 GHzSocket478, 400 FSB, L2 cache:256KBAnyAny 
2A GHzSocket478, 400 FSB, L2 cache:512KBAnyAny 
2.20 GHz400 FSB, L2 cache:512KBAnyAny 
2.26 GHz533 FSB, L2 cache:512KBAnyAny 
2.40 GHz400 FSB, L2 cache:512KBAnyAny 
2.40A GHz533 FSB, L2 cache:1MB, 90nm1004Any 
2.40B GHz533 FSB, L2 cache:512KBAnyAny 
2.50 GHz400 FSB, L2 cache:512KBAnyAny 
2.53 GHz533 FSB, L2 cache:512KBAnyAny 
2.60 GHz400 FSB, L2 cache:512KBAnyAny 
2.66 GHz533 FSB, L2 cache:512KBAnyAny 
2.80 GHz533 FSB, L2 cache:512KBAnyAny 
2.80A GHz533 FSB, L2 cache:1MB, 90nm1008Any 
3.06 GHz533 FSB, L2 cache:512KB, HT, C1/D1AnyAny 
3.40 GHz800 FSB, L2 cache:1MB, rev.G11009.008Any 

    - This CPU may or may not be supported by the motherboard.

When part numbers are not supplied by motherboard manufacturers, we use best guess approach to determine part numbers based on CPU model, frequency and features. In some cases our guess may be incorrect or incomplete. Please always verify part numbers before committing to buying the CPU.

Comments: 11

What is the sSpec code for this? or part numbers?

2007-08-18 23:45:43
Posted by: mets reyes

2.80A GHz 533 FSB, L2 cache:1MB, 90nm 1008 Any


3.40 GHz 800 FSB, L2 cache:1MB, rev.G1 1009.008 Any

 

2007-08-19 00:10:52
Posted by: Gennadiy

> 2.80A GHz 533 FSB, L2 cache:1MB, 90nm 1008 Any

RK80546PE0721M (BX80546PE2800E)

> 3.40 GHz 800 FSB, L2 cache:1MB, rev.G1 1009.008 Any

RK80546PG0961M (BX80546PG3400E)

800 FSB

2009-07-15 10:00:26
Posted by: Don

Does this motherboard support Northwood 800 FSB processors SL6WF & SL6WJ?

Intel Pentium 4 2.8GHZ FSB 800 1M

2009-10-04 10:43:20
Posted by: Shuamxer777

the matherbord das not runing on 800FSB ?
i have thes matherbord end thes CPU an on 800 fsb the system is showing blu screan !! :S:S:S

Intel Pentium 4 2.8GHZ FSB 800 1M

2009-10-04 10:43:48
Posted by: Shuamxer777

the matherbord das not runing on 800FSB ?
i have thes matherbord end thes CPU an on 800 fsb the system is showing blu screan !! :S:S:S

p4 - 3.0/1m/800

2010-06-22 21:33:09
Posted by: Ray Ph

it can run fsb 800 in OC
but lower in 10% in bios but
the system unstable (hang) sometimes or bluue screen

3.40 GHz 800 FSB, L2 cache:1MB, rev.G1 1009.008

2011-01-29 07:14:45
Posted by: Jim

My computer running great with this processoer using windows XP, however since updating to 1009.008 bios my AGP graphics card stopped working error code 43, this wasn't due to the CPU as still had my slower cpu fitted at this time. Because of error code aero will not work.

Does anyone know if there is a newer bios version available to fix this? I can roll back to 1008 but would have to go put a my slower cpu in again which would defeat the purpose.

3.40 GHz 800 FSB, L2 cache:1MB, rev.G1 1009.008

2011-01-29 07:22:45
Posted by: Jim

My computer running great with this cpu using windows XP, however since updating to 1009.008 bios my AGP graphics card stopped working in windows 7, error code 43, this wasn't due to the CPU as still had my slower cpu fitted at this time. Because of error code windows aero will not work. If I roll back to 1008 the graphics card is fine.

Does anyone know if there is a newer bios version available to fix this? I can roll back to 1008 but would have to fit my slower cpu as 1008 doesn't support the 3.4 Ghz :-(.

Wonder if ASUS would be so kind to release another bios update to remedy this. would be very much appreciated by loyal ASUS customers.

Hey JIM, you are the lyon i whas looking for!

2011-02-24 14:52:48
Posted by: Meridio21

Can you confirm that? Lets check this again:
1) You have AGP graphic card. AMD-ATI one? Model?
2) You have this working OK in XP and later in Win7 with bios 1008. OpenGL was right then?
3) You changed to 1009.008 and then in Win7 error code 43?
I have same issues with 1009.008, might be downgrade is a solution for me. Sapphire Radeon HD 2400. I can see Win7 replaces AGP via hyperion with native microsoft driver. Via do not support P4X533 in Win7.
Wait for your response, thanks in advance.

3.40 GHz 800 FSB, L2 cache:1MB, rev.G1 1009.008

2011-03-11 16:51:25
Posted by: Jim

I am using a Radeon 9800 Pro, its works with windows 7 when on 1008 bios, however does not work with the latest bios, windows aero will not work, error code 43, switch back to 1008 bios all is well.

I had to put my 3.06ghz P4 processor back in and confirmed this. Note the graphics card works on either bios with windows XP.

Unfortunately for me I prefer the faster processor so have the 3.4Ghz installed, but have to use the 1009 bios, so have to use windows XP otherwise graphics card is no use. I beleive the problem is with the bios, and nothing to do with the graphics card.

Bios and Vga

2011-05-22 20:31:36
Posted by: Rodrigo

Jim...
P4V8X-X
Pentium IV 3.0 HT
ATI Radeon HD3850

I'm having the same problem... Early in 2006 I made a update of bios to 1009.008
Now I'm using win 7 and the Vga doesn't work because code 43. I don't have any floppy drive to make a downgrade of bios (and I'm afraid to do it)!
Do you have any suggestion? Have you solved your problem. I'm waiting for a reply!

Last updated: Nov 24, 2006