ASUS P4G533-LA motherboard specifications
| CPU socket type: | Socket 478 |
| Front Side Bus: | 400 |
| Chipset: | 845GL |
Used in HP Pavilion and Compaq Presario computers |
NOTE: specifications are not complete
ASUS P4G533-LA CPU compatibility list
| Part Number | Frequency | Features | BIOS | PCB | Notes |
|---|
| Intel Celeron |
BX80532RC2500B
RK80532RC060128 | 2.5 GHz | 400 MHz FSB, Northwood | | | |
BX80532RC2600B
RK80532RC064128 | 2.6 GHz | 400 MHz FSB, Northwood | | | |
| | Any | 400 MHz FSB, Willamette | | | Should be supported - similar to P4G533 |
| Intel Pentium 4 |
RK80532PC060512
BX80532PC2500D | 2.5 GHz | 400 MHz FSB, Northwood | | | |
RK80532PC064512
BX80532PC2600D | 2.6 GHz | 400 MHz FSB, Northwood | | | |
| RK80532PC072512 | 2.8 GHz | 400 MHz FSB, Northwood | | | Will probably work, not confirmed |
| | Any | 400 MHz FSB, Willamette | | | Should be supported - similar to P4G533 |
| | Any | 533 MHz FSB, Northwood | | | Not supported |
| | Any | 800 MHz FSB, Northwood | | | Not supported |
| | Any | Celeron D | | | Not supported |
| | Any | Prescott | | | Not supported |
- This processor is not supported
When part numbers are not supplied by motherboard manufacturers,
we use best guess approach to determine part numbers based on CPU model,
frequency and features. In some cases our guess may be incorrect or incomplete.
Please always verify part numbers before committing to buying the CPU.
|
|
compatibility issues
i have p4g533-la board which don't have Graphics Connector (AGP slot). i saw a p4v533-mx. they are both socket 478. are they compatible? can i change my board with the p4v533-mx?
please someone help me...
P4G533 and 2.8ghz SL7EY
I put a 2.8ghz (SL7EY, Malaysia) in my P4G533-LA and it worked without a hitch.
angelo rodelas
yes it will work
about PAG533
You wold have to replace the processor for a 533mhz fsb. as far as i can tell the only difference between these 2 boars are only the FSB (400vs533) and the added AGp slot on the PAV533. Not much diffence. but if you decide for the new board I have a p4 2.6Ghz Nothwood with 533fsb available, let me know.
2.8ghz 400FSB celeron "SL77T" works
SL77T Works just fine, I had the newest BIOS before trying the swap.. no issues.
This along with snipes success with the "SL7EY" 2.8ghz 400fsb Pentium-4 (not easy to find nor cheap when you do)
It appears this board can support all 400FSB Chips.. It will also run Prescot 533's (dunno about 800's probably not) however it will be underclocked as the board is HARDWIRED as 400fsb.. I've even tried pin mods with no success.. still runs at 400FSB
So 533 chips will run but they'll be at their multiplier X 100mhz(400mhz effective) which just plain sucks.
Correction
I misspoke, I just double checked the 533FSB chip I tested was the "SL6DW" a 2.53ghz p4 NORTHWOOD, NOT PRESCOTT.
Not sure if a Prescott would boot up at all but like I said the board is Hardwired for 400fsb so no point in using a 533 anyway you'll get lousy speed out of them.